Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Lynwood?
Chimney cap and crown work in Lynwood typically runs $260 to $925, with most single-family homes landing between $340 and $560 for a standard cap plus crown repair. A basic stainless-steel cap installed on an existing flue generally costs $185 to $385, while a full crown rebuild on a masonry chimney usually costs $450 to $1,100 depending on the size and condition of the cap at the top. Prices here sit a little lower than Westside or beach-city quotes because Lynwood’s housing stock skews toward single-story postwar homes with shorter, easier-to-access chimneys.
We’re Chimney Sweep Lynwood, and cap and crown work is one of the most common repairs we run into on Lynwood houses from the 1940s through the 1970s. This guide breaks down what you’ll actually pay in the Lynwood market in 2026, line by line, so you can budget before anyone climbs on your roof.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what the numbers look like across the line items. These are Lynwood-market ranges for 2026, based on typical single-family homes. Your exact quote depends on roof pitch, chimney height, and what we find when we’re up there.
| Line Item | Typical Low | Typical High | Notes |
|---|---|---|---|
| Standard stainless-steel single-flue cap | $185 | $385 | Most common install; includes removal of old cap |
| Multi-flue cap (2 to 3 flues) | $320 | $640 | Common on older Lynwood two-flue masonry chimneys |
| Custom copper or shroud cap | $650 | $1,400+ | Fabricated to fit; Gelco and Copperfield lines |
| Crown inspection and spot crack sealing | $45 | $120 | Often bundled free with a sweep |
| Crown repair (patch and reseal) | $220 | $450 | Hairline to moderate cracks, good bond |
| Full crown rebuild (masonry) | $450 | $1,100 | Overhanging, cracked or spalling crown |
| Crown wash / coating (waterproof seal) | $150 | $340 | Extends crown life; often paired with cap |
| New crown + stainless cap combo | $540 | $925 | Most common full package for older homes |
| Chase cover (metal factory-built chimney) | $280 | $580 | Common on 1960s-70s prefab chimneys |
What drives the price up? A steep or multi-pitch roof, a tall chimney that needs scaffolding, and complex crown geometry all add labor. Prefabricated chimneys with damaged chase covers cost more to fabricate a match than a stock stainless cap. What drives it down? A simple single-story ranch with a straight-up flue, and bundling the cap with a sweep and inspection so we’re already on the roof.
We name the brands we use because we stand behind what goes into your home. Our cap and crown work uses Gelco and Famco products for caps and shrouds, Olympia Chimney for venting terminations, and Copperfield for custom tops. Those are professional-grade lines used by certified chimney specialists, not whatever’s cheapest at the supply house. If your crown looks bad but the flue is solid, we’ll also look at whether a HeatShield restoration can save you from a full reline later.
What Affects Chimney Cap & Crown Pricing in Lynwood
- Chimney height and roof access. A single-story postwar ranch in Lynwood with a low-pitch roof keeps labor down. A two-story with a steep pitch and a tight side-yard setback (common along the older blocks near downtown Lynwood) means slower, more careful work and a higher labor portion of the bill.
- Masonry vs. prefab. Most of the housing stock here is postwar masonry, where crown repair is straightforward. Factory-built chimneys with a failed chase cover cost more to make right because the replacement has to match the exact termination.
- Crown condition. A hairline crack resealed is a $220 to $450 job. A crown that’s actually spalling, overhanging, or separated from the flue needs a rebuild, and that moves you into the $450 to $1,100 range.
- Number of flues. One flue, one cap. Two or three flues on an older masonry chimney need a multi-flue cap, which adds material and labor.
- Material choice. A stock stainless cap is the budget-friendly choice at $185 to $385. A copper or custom shroud cap for a front-facing chimney costs $650 to $1,400 or more because it’s fabricated to fit.
- What the inspection finds. Cap and crown work is often the cheapest fix on the roof. If we spot a cracked flue tile during the same visit, that’s a separate line item, and it’s why we inspect before we quote rather than guessing from the ground.
One local factor worth calling out: Lynwood sits in a basin where summer heat swings and winter rain do a number on mortar joints and crown wash. A crown that’s holding up fine in a cooler, drier climate can crack and spall faster here. We regularly see crowns on south-facing chimneys open up within a few seasons if water gets behind the caulk.
How to Save on Chimney Cap & Crown
The biggest cost saver is catching the crown before it fails. A $150 to $340 crown coating applied while the crown is still solid prevents the $450 to $1,100 rebuild down the road, and combining it with the cap install means one roof visit instead of two.
- Bundle the work. Have the cap and crown handled during a routine sweep and inspection. You’re paying for the visit either way, so the labor overlap saves you real money.
- Fix the crown early. A $220 to $450 crown patch now beats a $1,100 rebuild later. This is the single most common money-waster we see on Lynwood roofs.
- Choose the right cap, not the fanciest. For the vast majority of Lynwood homes, a stainless single-flue cap at $185 to $385 does everything a $1,000 copper shroud does. The custom top is worth it only if you’re matching a front-facing chimney.
- Address venting too. The same appointment can cover dryer vent cleaning, which is one of the leading causes of residential house fires. Two fire hazards, one visit, and no second contractor.
- Get a free estimate. Call (855) 916-8513 and we’ll quote against what we actually see, not a phone-ballpark range.
Professional-grade materials aren’t the place to save. A cheap cap that rusts out in three years is a repeat bill, and cheap crown mortar fails fast in our climate. The real savings come from bundling, timing, and picking the right product for your chimney.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Lynwood?
A standard stainless-steel single-flue cap costs $185 to $385 installed in Lynwood. Multi-flue caps run $320 to $640, and custom copper or shroud caps run $650 to $1,400 or more. Call (855) 916-8513 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper when the crown is still bonded to the flue, usually $220 to $450 for a patch and reseal versus $450 to $1,100 for a full rebuild. If the crown is spalling or separated, a rebuild is the right call. We quote based on condition, not a default upsell, so you’ll know which one you actually need.
Do I need a chimney cap if I have a crown in good condition?
Yes. The cap keeps rain, birds, and debris out of the flue, and the crown protects the masonry below it. They do different jobs, and a chimney with a solid crown but no cap is still a water-intrusion risk. Most Lynwood homes need both, and a combined cap-and-crown package usually runs $540 to $925.
How long does a chimney cap and crown job take?
A standard cap install takes about 30 to 60 minutes. A crown repair adds an hour or two, and a full crown rebuild typically takes half a day because the mortar has to set. Most cap-and-crown jobs we run in Lynwood are done in a single visit unless the crown needs a full rebuild.
Can I install a chimney cap myself?
We don’t recommend it, and not just because of the roof. A cap has to be sized and seated correctly to block water and animals without choking the flue, and getting it wrong can cause draft problems or carbon monoxide (CO) spillage into the home. The crown is worse: those are high-work surfaces on a pitched roof, and a crown that’s sealed wrong traps moisture and cracks faster. Call (855) 916-8513 and let us size and install it correctly the first time.
Why Homeowners in Lynwood Call Us for Cap and Crown Work
We sweep, inspect, and repair, so you’re not left with a report and no next step. Most sweep-only services hand you a clipboard and a referral, and you’re back to calling around. We diagnose and we fix. Our liner restoration work with HeatShield often saves a homeowner from a full reline, and our DuraFlex flexible liner systems let us work with older or non-standard chimney configurations that a rigid liner installer simply can’t fit.
One call covers your chimney and your dryer vent, two fire hazards and one visit. Rely on the chimney sweep team in Lynwood for routine cleaning too, and pair the cap work with a proper crown repair and waterproofing to protect the flue below.
We carry Gelco and Famco for caps and venting terminations, Olympia Chimney for venting, and Copperfield for custom tops. Our cap and crown work draws on the same professional-grade lineup we use on every job. When we can, we offer HeatShield liner restoration before we talk full relining, because repair beats replacement when repair is the right answer.
Get Your Free Cap & Crown Estimate
Cap and crown costs in Lynwood depend on your roof, your chimney, and what we find up there, and we’d rather quote from the roof than guess from the ground. Call Chimney Sweep Lynwood at (855) 916-8513 for a free estimate on your cap, crown, or both. We’ll tell you what’s actually needed, what it costs, and what can wait. Use this page as your starting budget and let us confirm the number before you spend a dime.
Pricing reflects the Lynwood market as of 2026. Chimney Sweep Lynwood offers free estimates – call (855) 916-8513.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Yasmin Haddad"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Veronica Martinez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Roger Miller